NON-POROUS PRIMER 1 GAL

TREMprime™ Non-Porous Primer is a low-VOC, water-based, quick-drying, one-part primer used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.

Basic Uses

• Non-porous surfaces and urethane sealants.
• A low-VOC, water based, quick-drying, one-part primer.
• TREMprime Non-Porous Primer is not a film-forming primer.
• It is used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics.
• Apply with a clean cloth.
• Remove all excess primer from cloth to ensure a very thin layer is applied.
• Dry time is 15 min at 70 °F (21˚C).
• Primer must be completely dry before applying sealant or coating.
• Urethane sealants and coatings can be applied up to 8 hr after primer has been applied.
• After 8 hr, the surface must be cleaned with a Tremco approved solvent and reprimed with TREMprime Non-Porous Primer.