EP PRIMER SACHET .25 GAL

KEMPERTEC® EP5 Primer is a quick-curing, penetrating, high bonding, primer used between acceptable prepared substrates and KEMPEROL® cold liquid-applied reinforced membrane and
coating systems.

KEMPERTEC® EP5 Primer is a solvent free, 2-part, cold liquid-applied epoxy resin.

KEMPERTEC® EP5 Primer is used to prime a wide range of substrates including bitumen roofing, concrete, brick, plywood, steel, glass and other substrates. Adhesion test is required to confirm adequate adhesion for alluminum, lead, copper, or zinc.

Please see the Substrate Primer Selection Table for a
complete list. Primer is also used to provide alkalinity protection for Kemperol 2K-PUR membrane prior to concrete or cementitious mortar/adhesive application

.Primer may be applied only when the ambient temperature is 41 ºF (5 ºC) and rising, and the substrate temperature is a minimum of 5 degrees above the dew point.

Kemperol membrane must be applied to primer within 8 days of primer application. Primer exposed for more than 8 days must be re-primed in accordance with KSA Technical Department
requirements.

*HAZMAT ITEM